Menu
Your Cart
আগামী ১ মে,শুক্রবার,'মহান মে দিবস'বা আন্তর্জাতিক শ্রমিক দিবস উপলক্ষে শপ সম্পূর্ণরূপে বন্ধ থাকবে। ২ মে ২০২৬ থেকে যথারীতি নির্ধারিত সময়ে শপ সম্পূর্ণরূপে খোলা থাকবে। , |  |

Holybro SiK Telemetry Radio V3 100mW 915MHz

Holybro SiK Telemetry Radio V3 100mW 915MHz
9,500৳
10,900৳
Ex Tax: 9,500৳
Holybro SiK Telemetry Radio V3 100mW 915MHz
Holybro SiK Telemetry Radio V3 100mW 915MHz
Holybro SiK Telemetry Radio V3 100mW 915MHz
Holybro SiK Telemetry Radio V3 100mW 915MHz
Holybro SiK Telemetry Radio V3 100mW 915MHz
-13 %
Holybro SiK Telemetry Radio V3 100mW 915MHz
Holybro SiK Telemetry Radio V3 100mW 915MHz
Holybro SiK Telemetry Radio V3 100mW 915MHz
Holybro SiK Telemetry Radio V3 100mW 915MHz
Holybro SiK Telemetry Radio V3 100mW 915MHz
V3 100 mW 915MHz Specification
Product price
10,900৳
Special price
9,500৳
Product code
1182
Brand
Holybro
Product model V3 100 mW 915MHz
Total Reviews

Review

Write a review

Note: HTML is not translated!
Bad Good

Description

HolyBro SiK Telemetry Radio V3 100mW 915MHZ for APM Pixhawk Radiolink MINI PIX RC Drone Flight Controller


Overview

This Holybro SiK Telemetry Radio is a small, light, and inexpensive open-source radio platform that typically allows ranges of better than 300m “out of the box” (the range can be extended to several kilometres with the use of a patch antenna on the ground). This radio is plug-n-play, ready for all Pixhawk Standard and other flight controllers, providing the easiest way to set up a telemetry connection between your Flight Controller and a ground station. It uses open-source firmware that has been specially designed to work well with MAVLink packets and to be integrated with the Mission Planner, Ardupilot, QGroundControl, PX4, and Flight Controller. The radios can be either 915 MHz or 433 MHz, and you should purchase the model that is appropriate for your country/region.


Features

  • Open-source SIK firmware
  • Plug-n-play for Pixhawk Standard Flight Controllers
  • The Easiest way to connect your Flight Controller and Ground Station
  • Interchangeable air and ground radio
  • Micro-USB port (Type-C Adapter Cable Included)
  • 6-position JST-GH connector

Specifications


SiK Telemetry Radio 100mW
                                                                                                         
Max RF Power20 dBm27 dBm30 dBm
Receive sensitivity-121 dbm @2kbps RF Data Rate, -105 dbm @64kbps RF Data Rate
Antenna Gain2dBi5dBi
RF Data Rates2, 4, 8, 16, 32, 64(default), 96, 128, 192, 250 kbps
Serial Interface Data Rate1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6(default), 115.2 kbps
Frequency Band902MHz - 928MHz or 414MHz - 460MHz
Interference ImmunityFrequency Hopping Spread Spectrum (FHSS) Configurable duty cycle
Address OptionsNetwork ID: 0 –255
ChannelsUp to 50 Frequency Hopping Channels
Supported Network TopologiesPoint-to-point
Configuration MethodMissionPlanner or AT Commands
Data FramingStandard or MAVLink protocol framing
Error correctionCorrects up to 25% of bit errors with open-source SIK firmware
Serial Data Connector & Interface6-pin JST-GH connector, 3.3V-TTL
USBMicro-USBType-C
SMA ConnectorRP-SMA female
Power ConnectorNAXT30
Operating Temperature-40~85°C
Dimension28 x 53 x 10.7mm (without antenna)66.5 x 32 x 16.5mm (without antenna)
Weight23.5g w/ antenna67g w/ antenna
Input Voltage (DC)5V7~28V
  • 2-way full-duplex communication through adaptive TDM UART interface
  • Transparent serial link
  • MAVLink protocol framing
  • Built in FT230X/FT23 USB to BASIC UART conversion IC

Electrical Data

  • Supply voltage:
    • 100mW version: 5V DC (from USB or JST-GH)
    • 1W version: 7~28V DC via XT30
  • Transmit current: 100 mA at 20 dBm
  • Receive current: 25 mA
  • Serial interface: 3.3 V UART


Package Included

  • 100mW options
    • Radio modules with antennas *2
    • Micro-USB to USB-A cable *1
    • Micro-USB to Micro-USB OTG adapter cable *1
    • Micro USB to Type-C Adapter
    • JST-GH-6P to JST-GH-6P cable *1 (for Pixhawk Standard FC)
    • JST-GH-6P to Molex DF13 6P (for Pix32, Pixhawk 2.4.6, etc.)
//